Menu
Cart 0

Hanna HI1270 Replaceable Probe Electrode for HI98103 Checker pH Meter

Hanna Instruments

  • $ 2700
  • Save $ 8


Item Description: Brand New Hanna Instruments HI 1270 Replaceable pH Meter Probe/Electrode - 

This is Replacement Probe for the HI 98103 Checker pH Meter - NOT the HI 98103 pH Meter!


pH Meter NOT Included!  But this is the unit it fits...
 
THIS LISTING IS FOR THE pH PROBE HI 1270 ONLY!
 
Plastic body, pH electrode with screw-type connector, to be used with HI 98103.

Item Specs:

Description   spare electrode
Reference   single, Ag/AgCl
Junction/Flow Rate   cloth
Electrolyte   gel
Max Pressure   0.1 bar
Range   pH: 0 to 13
Tip/Shape   spheric (dia: 3.0 mm)
Temperature
Sensor
  no
Amplifier   no
Body Material   polypropylene
Cable   no
Recommended Use   general purpose, field applications
Connection   screw cap
 
 

 


High Quality!

This unit comes with a 1 year warranty against manufacturers defects! You can bid with total confidence!

This meter is guaranteed for one year against defects in workmanship and materials when used for its intended purpose and maintained according to instructions. The electrode is guaranteed for a period of six months. This warranty is limited to repair or replacement free of charge. Damages due to accident, misuse, tampering or lack of prescribed maintenance are not covered. If service is required, contact the dealer from whom you purchased the instrument. If under warranty, report the model number, date of purchase, serial number and the nature of the failure. If the repair is not covered by the warranty, you will be notified of the charges incurred. If the instrument is to be returned to Hanna Instruments, first obtain a Returned Goods Authorization Number from the Customer Service department and then send it with shipment costs prepaid. When shipping any instrument, make sure it is properly packaged for complete protection.


Calibration Fluids! 

Don't forget to add a few pH Buffers to the order!  Keep your pH Meter in tip-top shape by calibrating periodically!  This unit needs a 2-point calibration, so the question is: which buffer solutions do I need?  For water based samples, use 7 and 10.  For unknown samples use 4 and 10.  The key is to steer the units calibration towards the ranges of your samples.  Testing acids, use 4 and 7.  Testing bases (caustic/alkyline) use 7 and 10.  Unknown samples 4 and 10. 

 

We also recommend using a special solution for keeping your pH Meter's electrode in tip-top shape!  Check out the Hanna Storage Solution in our eBay Store!

 

Shipping:

S&H within the USA (and it's territories) is a flat rate of FREE via USPS 1st Class Mail.

 

 


National Industrial Supply
30777 Rancho California #891420
Temecula, CA 92589, USA
Sales: 951.308.9269
Fax: 310.733.5480

Email: nisupply@gmail.com

Website: nisupply.com

 


We Also Recommend