Hanna HI98121 pH ORP Thermo Meter Chlorine HI 98121
Item Description: Hanna Instruments Combo pH, ORP & Thermometer Meter (HI 98121)
- Exclusive easy to replace cartridge stainless steel pH and ORP Electrode.
- Renewable cloth junction. If it becomes dirt simply remove and rejuvenate.
- Automatic temperature compensation
- Automatic calibration
- Direct contact temperature probe.
This HI 98121 meter is designed for simultaneous pH and ORP measurements and also reads temperature, which is continuously displayed on the dual level LCD.
An encapsulated external stainless steel sensor, positioned in close proximity to the pH electrode provides fast response. A fiber junction can be easily pulled out and replenished. And when finally spent, the pH electrode cartridge can be quickly replaced with the supplied electrode removal tool, reducing waste and cost.
HI 98121 works with common batteries and when turned on, displays the percentage of remaining battery life. The stability indicator ensures reliable readings.
Ergonomically designed for ease in handling, this meter will float if inadvertently dropped into water.
HI 98121 is supplied with protective cap, electrode removal tool, batteries and instructions.
|Range||pH||-2.00 to 16.00 pH|
|Range||Temperature||-5.0 to 60.0°C / 23.0 to 140.0°F|
|Resolution||Temperature||0.1°C / 0.1°F|
|Accuracy||Temperature||±0.5°C / ±1°F|
|Calibration||pH||automatic, at 1 or 2 points with 2 sets of memorized buffers
(pH 4.01 / 7.01 / 10.01 or pH 4.01 / 6.86 / 9.18)
|Temperature Compensation||Automatic for pH readings|
|Electrode||HI 73127 replaceable pH electrode (included); fixed ORP sensor|
|Battery Type / Life||4 x 1.5V with BEPS / approx. 250 hours of continuous use;
auto-off after 8 minutes of non-use
|Environment||-5 to 50°C (23 to 122°F); RH max 100%|
|Dimensions||163 x 40 x 26 mm (6.4 x 1.6 x 1.0")|
100 g (3.5 oz)
This unit comes with a 6 Month warranty against manufacturers defects! You can bid with total confidence!
Calibration Fluids and Storage Solutions!
Don't forget to add a few pH Buffers to the order! Keep your pH Meter in tip-top shape by calibrating periodically! This unit needs a 2-point callibration, so the question is: which buffer solutions do I need? For water based samples, use 7 and 10. For unknown samples use 4 and 10. The key is to steer the units calibration towards the ranges of your samples. Testing acids, use 4 and 7. Testing bases (caustic/alkyline) use 7 and 10. Unknown samples 4 and 10.
We carry 500ml bottles and 20ml pouches in 4.00pH, 7.00pH and 10.00pH. COMBINE AND SAVE ON THE SHIPPING!
125ml /4oz Bottle
We also recomend using a special solution for keeping your pH Meter's electrode in tip-top shape! Check out the Hanna Storage Solution in our Store!
National Industrial Supply
30777 Rancho California #891420
Temecula, CA 92589, USA
We prefer PayPal!
We Also Recommend