KN95 Respirator Face Mask Earloop Dust Masks FDA Registered KN95
KN95 Respirator Face Mask - 5 Layer - CE and FDA Approved (FDA-10063125)
Since these masks are pending NIOSH approval they are effectively KN95’s, but built to meet N95 specifications.
Do not use these masks for direct COVID-19 contact until NIOSH approves them.
A KN95 respirator is a respiratory protective device designed to achieve a very close facial fit and very efficient filtration of airborne particles. Note that the edges of the respirator are designed to form a seal around the nose and mouth. Surgical N95 Respirators are commonly used in healthcare settings and are a subset of N95 Filtering Facepiece Respirators (FFRs), often referred to as N95s. Centers for Disease Control and Prevention (CDC) National Institute for Occupational Safety and Health (NIOSH) and Occupational Safety and Health Administration (OSHA) also regulate N95 respirators
The similarities among surgical masks and surgical N95s are:
- They are tested for fluid resistance, filtration efficiency (particulate filtration efficiency and bacterial filtration efficiency), flammability and biocompatibility.
- They should not be shared or reused.
CE & FDA Certification can be provided upon request
KN95 Masks - Wear Duration and Reuse Protocol:
Please see the CDC website for up to date recommendations on wear duration and reuse procedures. Remember: "When in doubt, throw it out!".
An N95 respirator is a respiratory protective device designed to achieve a very close facial fit and very efficient filtration of airborne particles.
The 'N95' designation means that when subjected to careful testing, the respirator blocks at least 95 percent of very small (0.3 micron) test particles. If properly fitted, the filtration capabilities of N95 respirators exceed those of face masks. However, even a properly fitted N95 respirator does not completely eliminate the risk of illness or death.
KN95 masks are made to this standard, BUT they have yet to be approved by NIOSH - FDA has already sanctioned these masks however.
FEATURES and SPECIFICATIONS:
- High BFE/PFE
- Adjustable Nose Piece
- Elastic Ear Loop
- 5 ply Material
5 LAYERS THICK (100% new material for each layer):
- 1st ply: 50g leak proof Non-Woven Fabric
- 2nd ply: 40g Ethylene-Propylene Side By Side
- 3rd ply: 25g High Density Filter Layer
- 4th ply: 25g High Density Filter Layer
- 5th ply: 20g Direct Contact Skin Layer
DIMENSIONS: 16 x 11cm - 4 1/4" x 6 7/16"
PRICING: We apologize for the current price of these masks, BUT this price is far better than what the State of California is paying ($4.95/mask). Due to worldwide demand, the pressure on FDA approved suppliers has been great, and supply and demand have not been kind to our needs. Once the price for this item goes down, we will immediately lower it to pass on the savings. We initially purchased these for friends and family due to the manufacturers links we have cultivated over 20 years in the Far East. We will continue to purchase these (because they are hard to find on Google or anywhere else) until the need subsides and prices return to a pre-COVID-19 price structure.
National Industrial Supply
30777 Rancho California #891420
Temecula, CA 92589, USA
Sales: 310.748.6858 - Fax: 310.733.5480 - E-mail: firstname.lastname@example.org - Website: www.nisupply.com