Replacement Rubber Feet for Hanna & Milwaukee Instruments Refractometers – 6-Piece Kit

Guaranteed to Fit. Guaranteed to Last.

Keep your refractometer stable and ready to use with this six-piece kit of replacement rubber feet, designed to match the original equipment specifications for compatible Hanna Instruments and Milwaukee Instruments refractometers.

Missing, worn, or damaged rubber feet can cause your refractometer to wobble on a countertop or workbench. These replacement bumpers restore a secure, stable base so you can work comfortably and keep your instrument positioned properly during routine measurements.

Finding replacement feet for your refractometer shouldn’t mean replacing an otherwise perfectly good instrument. National Industrial Supply makes it easier to get your equipment back in working order with an affordable, purpose-fit replacement kit.

Product Features

• Six rubber feet per kit: A convenient set for replacing missing or worn bumpers.
• Designed to match OEM specifications: Made to match the original bumper dimensions for a precise fit on compatible instruments.
• Compatible with select Hanna Instruments and Milwaukee Instruments refractometers: Check your existing feet and instrument before ordering to confirm compatibility.
• Helps eliminate wobbling: Provides stable contact with the work surface during everyday use.
• Durable black rubber construction: Designed for dependable, repeated use in laboratory, industrial, commercial, and other measurement environments.
• Affordable alternative to replacing your instrument: Restore stability without the expense of purchasing a new refractometer.
• Anti-skid. A fresh set of black rubber bumpers will minimize the sliding of your refractometer on a testing surface.

Guaranteed to fit the following Hanna and Milwaukee Refractometers:

These replacement rubber feet are compatible with the following Hanna Instruments refractometer models:

● HI96800

● HI96801

● HI96802

● HI96803

● HI96804

● HI96811

● HI96812

● HI96813

● HI96814

● HI96816

● HI96821

● HI96822

● HI96831

● HI96832

● HI96841

Compatible Milwaukee Instruments Refractometers

These replacement rubber feet are compatible with the following Milwaukee Instruments refractometer models:

● MA871

● MA872

● MA873

● MA881

● MA882

● MA883

● MA884

● MA885

● MA886

● MA887

● MA888

Fit and Durability Guaranteed

We stand behind these replacement rubber feet. They’re designed to provide a precise fit and dependable service life when installed on compatible refractometers and used under normal conditions.

If you have questions about fitment, contact National Industrial Supply before ordering. We’re happy to help you find the right replacement part for your instrument.

What’s Included?

• 6 black replacement rubber feet
• Alcohol wipes

Who Needs This Kit?

This kit is ideal for laboratory technicians, quality-control professionals, food and beverage producers, industrial users, and anyone who relies on a Hanna Instruments or Milwaukee Instruments refractometer for routine measurements.

If your refractometer rocks on the counter, or its original rubber feet have become lost, worn, or damaged, this replacement kit offers a simple and economical solution.

Order your six-piece replacement kit today and get your refractometer back on a stable footing.

Frequently Asked Questions

• Should I replace just one rubber foot or all six?

We recommend installing all six new rubber feet and removing the original feet. Replacing only one may leave your refractometer with feet of different ages, thicknesses, or levels of wear. A complete set provides more uniform support and helps keep the instrument stable and level.

• How do I remove the original rubber feet?

Carefully lift or peel away each original foot. If part of an old foot or adhesive remains on the refractometer, gently scrape it away with a knife or toothpick. Use caution to avoid scratching the housing or damaging the mounting surface.

• How should I prepare the surface before installing the new feet?

After removing the old feet and residue, wipe each mounting area with the included alcohol wipe. This removes dust, oil, and other particles that could prevent the new feet from adhering properly. Allow the surface to dry completely before installation.

• Do I need to clean the surface even if it looks clean?

Yes. Small amounts of dust, oil, or residue may not be visible but can interfere with adhesion. Cleaning each area with the included alcohol wipe helps ensure the best possible bond.

• How do I install the replacement feet?

Make sure the mounting surfaces are clean and dry. Remove the backing from each replacement foot without touching the adhesive surface, then position the foot carefully over the original mounting location. Press firmly for several seconds to help it adhere.

• How long should I wait before using the refractometer?

Allow the adhesive to set before placing the refractometer on a work surface. Avoid sliding, lifting, or putting heavy pressure on the instrument immediately after installation. Following the adhesive manufacturer’s recommended setting time, if provided, will help ensure the feet remain securely attached.

• Are these feet suitable for laboratory use?

Yes. The anti-skid design helps reduce movement on smooth countertops and workbenches, making these replacement feet well suited for laboratory environments and other precision work areas.

• Will the new feet prevent my refractometer from moving?

The anti-skid feet are designed to improve stability and reduce sliding during normal use. They are not intended to permanently secure the refractometer to a surface or prevent movement under excessive force.

• What if an old foot will not come off easily?

Do not forcefully pry against the instrument housing. Work slowly with a toothpick or carefully controlled knife motion. If adhesive residue remains, remove it gradually and clean the area with the included alcohol wipe before installing the new foot.

• Can I reuse a replacement foot if I install it incorrectly?

For the best adhesion, position each foot carefully before pressing it into place. Once the adhesive has contacted the cleaned surface, removing and repositioning the foot may reduce its ability to adhere securely. We recommend taking your time during installation.

• What should I do if the refractometer still wobbles after installation?

Check that all six original feet and any remaining adhesive residue have been removed. Confirm that each mounting surface is clean, dry, and free of particles, and verify that every new foot is seated flat. Also make sure the work surface itself is clean and level.

• Are these replacement feet compatible with every refractometer?

These feet are intended for the Hanna Instruments and Milwaukee Instruments models listed above. Please compare your refractometer’s model number with the compatibility lists before ordering.

National Industrial Supply
Your Local Refractometer Experts!

Friendly service, expert advice, quality instruments, and exceptional prices.

30777 Rancho California Rd #891420
Temecula, CA 92589

Phone: (310) 748-6858
Email: nisupply@gmail.com
Website: https://www.nisupply.com